MBone

the delays are for my visual clues to where i am getting my information. I some times use the computer during the macro runs and need to know when to leave it be and when i can use it. This topic came from getting an error from a pixel (macro was doing correct and i didnt account for it) where i had a rotating icon. It would cycle over where i need to get the pixel info and i didnt think it was doing that. I added "and" to the check with 2 ms apart and fixed the problem. Correct me if i am work for doing this way but i use this program by breaking things down into logic mods and macro mods. Just to clear up things as i tend to be a little back country typer. Logics are macros that get variables to decide what macro to do next. Currently i have it doing what i need to but not the most efficient way. And i need a little bit of information. since i am doing the break down of mods do the variable i set stay, for example N10 on one of the macros stay that way until they are overwritten or do they clear after step has been complete. I will try to draw this out. Macro Run: username/password Delay 30 Seconds Macro Run: example one ...............(these are broken down further on each one) (N10 from here will or will not change) Delay 30 Seconds Macro Run: example two ...................................................(when this one starts) Delay 30 Seconds Macro Run: expample three IF i need to reword it let me know. Mbone Or well i will do it now, For an example will N10 stay a set value until it is changed with an input or by variable set intenger?

I have had great results when i figure out how i want to do thing. The problem that i was having here was that i was getting stuff from two variables and when i was suppose to be getting from one. After i found my mistake it works fine. In my opinion this is a pretty solid program. I have been able to do what i want with it. mbone

here is the code. Mouse Move Screen 1355, 190 Delay 2 Seconds Get Pixel: Screen Coords: 1355,190 into %N11% If Variable %N11% = 0 Text Type: <F1> End If Mouse Move Screen 962, 1031 Delay 4 Seconds Mouse Move Screen 1355, 190 Get Pixel: Screen Coords: 1355,190 into %N11% Delay 4 Seconds If Variable %N11% <> 0 Text Type: <F2><F3> Mouse Move Screen 918, 985 Mouse Left Button Click Mouse Move Screen 918, 985 End If Can some confirm this? When the command get pixel add new infomation to N11 if the old is overwrote or combined? MBone

thanks i will test it out and let you know. I knew the command was there but i could not find it or figure out away to implement it. mbone

Repeat until N1=34 Mouse move 123,123 Get pixel into N2 If var N2 >=1000 and If var N2 <=1005 text type F2 F3 delay 60 seconds else delay 20 seconds (What command do i put here)(this is where i want to put in the counter to add 1 every time it completes the macro) end repeat end I have this macro running as intended but i want to add a loop and timer on it. I was reading last night and it says i can do it but i just dont know how to. To explain what i want is to add the macro counter on the ELSE part of the macro. So that it counts up to a certain number and then the loop will stop. I do understand that i have to put in "repeat width 1" so that i will get 01,02,03 etc... What i dont know how is the getting it from 01, 02 and so on. The help on it was a little confusing. also does anyone know what the PAUSE command it. I tried the "pause" and "Scroll lock" keys but it just kept going. The pause button really helps when testing out programs without having to what for the outside variable to happen. thanks MBone

Try this and let me know. Sorry i did kind of confuse myself. sometimes the hands do something but my brain is saying something else. I am not the best at it but it helps me when people give me an idea, right or wrong. If Ping Successful: "www.yahoo.com" Delay 300seconds (adjust to what ever you like) Else the way you have it set up it will keep going 10k and then stop. and also you could open a command line do ping www.thewebsite.com /t that will keep the ping going if you want to run that in the background. Mbone

Was wonder if any knows a way of recording the control key into a regular macro. I have tried the Adding it manually to the script by doing the text type as well as the control key down, then left click and then control key up but no go. What i am needing to do is control click on something on the screen. My current work around for this is using the right mouse button to do this. I sometimes get a little bit of latency and it can cause the click to be in the wrong place. anyone have suggestion? Mbone

JA Read over the "and, or and xor" commands and look at the example macros. They helped me. +++++ Get text in t1 (i dont have the program in front of me so i cant remember the right command) at screen/window coordinates. if var %t1% contains ! continue next step ELSE delay 30 second End if +++++ and +++++ program run "cmd.exe" text type "ping thisisthewebsite.com" then use the if var %t1% contains ! continue next step ELSE delay 30 second End if +++++ I hope this helps. I will look around again when i get home and open up the laptop. I hope this kind of got you heading in the right direction. Mbone

I was putting the "variable set integer" as well as "get pixel color" into N1 for both. Thanks for all the views. Mbone

I got the logic to work a few time and then i added a delay on it and i cant get it to work now. I have put in the logic control and need someone to put a different set of eyes on it to see if i am doing something wrong. Let me explain what i am trying to do. I play a online game and using this to run a few task for me. I have it set to get the pixel color of a item that is only available at one point in the game and only on the screen at 1668,177. When i do pixel color with the mouse locator i get 12806656. I get a different number (14776832)when i do the get pixel at 1668, 177 and put them into N1 variable. So i both and cant seem to get them to work. I set a macro to run if the variable passes or if it fails so that i can test it out. The other macros are really simple click here and type "delayed" or "it worked" and work every time i use them. <IVAR2:01:01:14776832> <MMS2:1668,177> <DELAY:2> <GETPX:2:S:001668:000177> <IFVAR2:5:01:1:N2T> <MACRUN2:it worked> <ENDIF><IFVAR2:5:01:2:N2T> <MACRUN2:delayed> <ENDIF> If you have suggest or see what i am doing wrong please let me know. I am at a stand still on getting this logic to work correctly now. thanks MBone

No i didnt see it. I was looking to hard at the forest to see the trees. thanks setting me back on the right path, I didnt see the example but now i am learning. The else function is quite nice that i found how to use it. Many thanks MBone

Thanks for the help so far. Can some one explain the "The End if, Else, And, OR and XOr commands" <IVAR2:01:01:5066061> <MMS2:1008,983> <DELAY:15> <REP3:08:000001:000002:0002:1:01:N1> <DELAY:2> <GETPX:2:S:001008:000983> <IFVAR2:5:02:1:N1> <ENDIF> <ENDREP> I set this one up with some time testing it and i think i have got it work right. I have the color from the place i use to see if i am on the right screen and then put it in as N1 and then sample with N2 and then check every 2 seconds to see if it has loaded right. After that i move on to the next task. What i dont understand and cant seem to find the correct info is how to use the ELSE, and , OR and the XOr commands. I have tried to test them out but since i am new i am not 100% that i have got it right. Any links to examples or newsgroups is great. And the getting color command was what was holding me up. Many thanks MBone

This should work. I was looking for it and could not find it. I did find out what color i needed. Thanks for the help. MBone

I am working on adding check to the macro i am using. I want to get away from it being just built around time and sometimes the internet is a little slower as everyone knows. i have been looking and i cant seem to find the Get color variable command. Is there a list of what all the "IF Variables" are and how to program them. Right now i am trying to work the color ones into the program. Thanks MBone

i found a work around for it but if anyone could tell me how to get it to work it would be great. Working on expanding the small macro i have running right now. thanks MBone

I am trying to use the cntrol key when i do the capture of a macro. I capture everything but the control press. Is there a way to do this with out having to go back and manually add it where i need it? Mbone

thanks, I just wanted to get an idea before i bought the program. I was not for sure but i will look about getting it work now. MBone

I am wondering if the macro express can be set up to so that I can play with the online game eve-online.com. I want to run use this to set up so that I can mine on the game on my second computer with minimal supervision. I have tried the trial and know that it will work with the game. What I am asking is that I set up all the macro to do what I need. Then at different point it need to go dump the load that has been gathered or to relock a target. Is there away to make the macro express do this. So that is making some kind of decision on what to do next. M Bone

I have been using the trial and thinking about buying ME. I seems to be the best macro program that i have tried. What i am looking for is how users are setting this up to run with eve-online. I have seen some ideas on the forum and want to work with them a little more. If you play the game then you know that mining can be a real pain. I run different account with the game and would like to run this on one while i play on the other. I am going to be watching over it but i would like to let it do most of the work on its own. Currently any suggestion would be great. I know that it has the logic side of the let you set varibles but will it work with a different program or is it just for internal management? thanks MBone